Products Descriptions

Using: Connect input power positive pole to 'IN' pin Connect negative pole of input source and output to 'G' pin Connect output positive pole to 'OUT' pin

This is multiprotection fuse for DIY projectsFeatures: Overvoltage protection Over current protection Short circuit shield Reverse polarity protection Second step protection - 3 amps hardware fuse How to use:  Set jumper to pick the output current cut-off (1 or 1.5 amps) Set jumper to pick the input voltage cut-off  (6, 10 or 14 volts) The lighted diode indicate cut-off state Connect input power to the 5.5 jack or the screwed connector (on the same side with the jack connector)  Connect output to the JST-XH connector or screwed connector (on the same side with the JST-XH connector) Tech Specs: Input voltage...